Godox WES2 2-Person Wireless Microphone System for USB-C Devices (2.4 GHz)

Enhance your audio recordings on USB-C mobile devices with the Godox WES2 2-Person Wireless Microphone System. This setup features two clip-on transmitters equipped with omnidirectional microphones and a dual-channel receiver that connects via USB-C. Each transmitter offers advanced noise reduction through two selectable modes to minimize abrupt outdoor sounds effectively. Included accessories are a USB-A to USB-C cable, two furry windscreens, and a charging case to keep your system ready for use.

Compact Components, Plug-In Receiver

Simply plug the dual-channel receiver into your compatible mobile device using the built-in male USB-C connector. The receiver weighs only 5.66g while the transmitters weigh only 11.3g each. All components also feature a female USB-C port, which can be used for charging or data delivery.

Clip-On Transmitters with Advanced Noise Reduction

Integrated omnidirectional microphones on the transmitters capture crisp audio during any 2-person vlog or livestream. Onboard controls can toggle the advanced noise reduction. Use the iOS/Android mobile app to control the two different modes—either weak or strong—depending on your noise environment. The transmitters can capture audio with a 48 kHz/16-bit sampling rate and a maximum 110 SPL.

200m Transmission Distance

All the components of the WES2 system can communicate to one another from up to 200m away via line-of-sight 2.4 GHz technology. This transmission is resistant from interference and has a high gain.

Mobile App Control, Plug-and-Play Setup

Simply plug your receiver into your mobile device and start up the Godox mobile app to start recording. The app allows you to playback your recorded audio or control advanced settings like transmitter volume and noise reduction. The USB-C port on the receiver also allows you to charge your mobile device while you record.

Long Battery Life

The transmitter units feature a built-in 140mAh battery with an 8-hour runtime. Recharge the components via USB-C port or use the included charging case. The charging case stores all components together and recharges the transmitters in just 2 hours. Thanks to its 1400mAh battery, the case can recharge the system two times on a single charge. The receiver runs on plug-in power from your connected device.